LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Avalon XLS >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Installation

Blower Unit: Installation

  1. INSTALL BLOWER ASSEMBLY 
    1. Install the blower assembly with the 6 screws.
  2. INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY  (See REASSEMBLY  )
  3. CONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY  (See INSTALLATION )
  4. INSTALL STEERING COLUMN ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying Blower Assembly With Screws
    G05004898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL AIR CONDITIONER TUBE AND ACCESSORY  (See INSTALLATION  )
  7. INSTALL SUCTION HOSE SUB-ASSEMBLY  (See INSTALLATION  )
  8. CONNECT BATTERY NEGATIVE TERMINAL 
  9. PERFORM SYSTEM INITIALIZE 
    1. Some systems need initialization when disconnecting the cable from the negative battery terminal.

      HINT:

      See INITIALIZATION

  10. ADD ENGINE COOLANT  (See REPLACEMENT )
  11. CHECK FOR ENGINE COOLANT LEAKS  (See REPLACEMENT )
  12. CHARGE REFRIGERANT  (See REPLACEMENT  )
  13. WARM UP ENGINE  (See REPLACEMENT  )
  14. INSPECT FOR REFRIGERANT LEAK  (See REPLACEMENT  )
  15. INSTALL WINDSHIELD WIPER MOTOR AND LINK  (See INSTALLATION )
  16. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH  (See INSTALLATION )
  17. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals