LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Prius Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Center Airbag Sensor Assembly >> Removal

Center Airbag Sensor Assembly: Removal

CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see AIRBAG SYSTEM  ).
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See  REMOVAL  ) 
  3. REMOVE NO. 3 AIR DUCT REAR 
  4. REMOVE CENTER AIRBAG SENSOR ASSEMBLY 
    1. Remove the 3 bolts and airbag sensor.
    2. Disconnect the airbag sensor connectors.
scientia non olet · About LEMON Manuals