LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Rear Seat Outer Belt Assembly >> Removal

Rear Seat Outer Belt Assembly: Removal

  1. REMOVE REAR DOOR SCUFF PLATE RH (See  REMOVAL  ) 
  2. REMOVE REAR DOOR SCUFF PLATE LH (See  REMOVAL  ) 
  3. REMOVE REAR DOOR OPENING TRIM RH 
  4. REMOVE REAR DOOR OPENING TRIM LH 
  5. REMOVE TONNEAU COVER ASSEMBLY 
  6. REMOVE DECK BOARD NO. 2 
  7. REMOVE DECK BOARD SUB-ASSEMBLY (See  REMOVAL  ) 
  8. REMOVE DECK FLOOR BOX REAR (See  REMOVAL  ) 
  9. REMOVE LUGGAGE COMPARTMENT TRAY (See  REMOVAL  ) 
  10. REMOVE BACK DOOR WEATHERSTRIP 
  11. REMOVE DECK TRIM COVER REAR (See  REMOVAL  ) 
  12. REMOVE REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY 
  13. REMOVE REAR SEAT SIDE GARNISH RH (See  REMOVAL  ) 
  14. REMOVE REAR SEAT SIDE GARNISH LH (See  REMOVAL  ) 
  15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (See  REMOVAL  ) 
  16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (See  REMOVAL  ) 
  17. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY 
    1. Using a screwdriver, remove the shoulder anchor cover.

      HINT:

      Tape the screwdriver tip before use.

    2. Remove the bolt and disconnect the rear seat 3 point type belt assembly outer (shoulder anchor side).
    3. Remove the bolt and disconnect the rear seat 3 point type belt assembly RH (floor anchor side).
scientia non olet · About LEMON Manuals