Inspection Procedure

HINT:

When using the intelligent tester, start from  1. When not using the intelligent tester, start from  2.

1. READ VALUE OF INTELLIGENT TESTER (KEY UNLOCK WARNING SWITCH) 
   1. Check the DATA LIST for proper functioning of the key unlock warning switch operation (see DATA LIST/ACTIVE TEST  ).
   • OK: GO TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  
   • NG: GO TO NEXT STEP 
2. CHECK UNLOCK WARNING SWITCH ASSEMBLY 
   1. Check the unlock warning switch (see INSPECTION ).
   • NG: REPLACE UNLOCK WARNING SWITCH ASSEMBLY 
   • OK: GO TO NEXT STEP 
3. CHECK WIRE HARNESS (WARNING SWITCH - BODY ECU) 
   • NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 
   • OK: GO TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE