Inspection Procedure

1. CHECK THE MAP DISC 
   1. Check that the map disc is not deformed or cracked.

      Standard: No deformations or cracks appear on the map disc. 

   Fig 1: Checking For Deformations Or Cracks Of Map Disc

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   NG: REPLACE THE MAP DISC 

   OK: Go to next step 

2. SET DESTINATION 

1. Set another destination and check if the system can calculate the route correctly.

   Standard: Route can be correctly calculated. 

OK: NORMAL OPERATION 

NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE