LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Seat System) >> Front Seat Back >> Installation

Front Seat Back: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install seat back by slide it downward onto the seat assembly (Figure ).
  2. Install seat back mounting screws (Figure ).
  3. Install seat back cover and engage J-straps.
  4. Install three screw attaching side cushion cover. (Refer to INSTALLATION  )
  5. Install seat back panel onto seat. (Refer to INSTALLATION  )
  6. Install screw attaching front cushion shield.
  7. Remove the armrest. (Refer to INSTALLATION  ).
  8. Install front seat into vehicle. (Refer to INSTALLATION  ).
  9. Connect battery negative cable.
scientia non olet · About LEMON Manuals