LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> 4Runner Base >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments - V6 & V8 >> Throttle Position Sensor >> V6 >> Highlander

Throttle Position Sensor: V6: Highlander

  1. Manufacturer does not list procedure for Throttle Position (TP) sensor adjustment. Only information available is for checking resistance of TP sensor.
  2. Disconnect electrical connector from TP sensor. Note electrical terminals on TP sensor. See Figure.
  3. Using ohmmeter, check resistance between specified terminals in relation to throttle position. See THROTTLE POSITION SENSOR RESISTANCE  table. Replace TP sensor if resistance is not within specification.
scientia non olet · About LEMON Manuals