Section 2 (Charging System - Generators & Regulators): Overhaul: Generator: Assembly
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2000 Toyota Tundra, 2000 Toyota Tacoma, 2000 Toyota Sienna, 2000 Toyota RAV4, and 2000 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
To assemble, reverse disassembly procedure. Use generator Pulley Set Nut Wrench Set (SST 09820-63010) to install generator pulley. Place SST "C" securely into a vise. Install SST "A" and "B" and generator into SST "C". See Fig 2. Tighten pulley nut to 81 ft. lbs. (110 N.m) in the opposite direction of disassembly. After completing assembly, verify rotor turns smoothly.