Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Tie-rod end nut | 55 | 5.6 | 40.5 |
| Tie-rod end lock nut | 55 | 5.6 | 40.5 |
| Steering gear case bolt | 135 | 13.8 | 99.5 |
| Rack damper screw* | 25 N.m (2.5 kgf-m, 18.5 lbf-ft) → 0 N.m (0 kgf-m, 0 lbf-ft) → 5.0 N.m (0.5 kgf-m, 3.7 lbf-ft) → loosen by 13 ± 1° | ||
| Steering rack damper screw lock nut | 59 | 6.0 | 43.5 |
| Ground bolt | 5.0 | 0.51 | 4.0 |
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to: