LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Repair Instructions >> P Position Switch Inspection

P Position Switch Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove console box, see CENTER CONSOLE BOX REMOVAL AND INSTALLATION .
  2. Disconnect select lever connector.
  3. Check for continuity between terminals "1" and "6" of select lever connector (1). If check result is not as specified, replace select lever assembly.

    P position switch specification 

    ITEM SPECIFICATION

    Condition Specification
    "P" range Continuity
    Other than "P" range No continuity
    Fig 1: Checking Continuity Between Terminals 1 And 6 Of Select Lever Connector
    G06527868Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals