Enabled Conditions
WARNING: This page is about a different variant/trim than selected.
ENABLED CONDITIONS CHART
| Parameter | Minimum | Maximum |
|---|---|---|
| P1816: | ||
| Battery voltage | 10.5 V | - |
| Engine Speed | 450 rpm | - |
| P1818: | ||
| Shift position | "D" range | |
| Vehicle speed | 10 km/h (6 mile/h) | - |
| Accelerator pedal position | 12.5% | - |
| Engine speed | 450 rpm | - |
| Battery voltage | 10.5 V | - |
| Transmission fluid temperature sensor | No DTC (P0712, P0713) | |
| Transmission range sensor | No DTC (P0707, P0705) | |
| Line pressure control solenoid valve | No DTC (P0962, P0963) | |
| Stepper motor | No DTC (P1816) | |
| Primary pulley speed sensor | No DTC (P0717) | |
| Secondary pulley speed sensor | No DTC (P0722) | |
| Primary pressure sensor | No DTC (P0842, P0843) | |
| Secondary pressure sensor | No DTC (P0847, P0848) | |
| CAN communication | No DTC (U0100, U0073) | |