Table TCC On Command
WARNING: This page is about a different variant/trim than selected.
ACCELERATOR PEDAL POSITION CHART
| Accelerator pedal position (%) | 0.0 | 12.5 | 20.0 | 25.0 | 35.0 | 62.5 | 75.0 | 87.5 | 100.0 |
| Vehicle speed (km/h) | 16 | 16 | 16 | 16 | 24 | 29 | 29 | 29 | 29 |
| (mile/h) | 10 | 10 | 10 | 10 | 15 | 18 | 18 | 18 | 18 |
VOLTAGE SPECIFICATION
| Parameter | Minimum | Maximum |
|---|---|---|
| P0722: | ||
| Monitor 1: | ||
| Primary pulley speed | 1000 rpm | - |
| Battery voltage | 10.5 V | - |
| Primary pulley speed sensor | No DTC (P0716) | |
| CAN communication | No DTC (U0100, U0073) | |
| Monitor 2: | ||
| Last vehicle speed calculated by secondary pulley speed | 10 km/h (6 mile/h) | - |
| Battery voltage | 10.5 V | - |
| Primary pulley speed sensor | No DTC (P0716) | |
| CAN communication | No DTC (U0100, U0073) | |