Enabled Conditions
WARNING: This page is about a different variant/trim than selected.
ENABLED CONDITIONS CHART
| Parameter | Minimum | Maximum |
|---|---|---|
| P0721: | ||
| TCC ON command = True Consisting of: Engine speed >= 800 rpm Transmission fluid temperature >= 10 °C (50 °F) Accelerator pedal position > Table TCC ON command |
||
| Battery voltage | 10.5 V | - |
| Stepper motor | No DTC (P1816) | |
| Primary pulley speed sensor | No DTC (P0717) | |
| Secondary pulley speed sensor | No DTC (P0722) | |
| CAN communication | No DTC (U0100, U0073) | |