LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> General Description >> OBD System Description - Comprehensive Component Rationality Monitor >> Secondary Pressure Control Solenoid Valve Rationality Monitor >> Enabled Conditions

Enabled Conditions

WARNING: This page is about a different variant/trim than selected.
ENABLED CONDITIONS CHART

Parameter Minimum Maximum
P0776: 
Shift position "D" range
Vehicle speed 10 km/h (6 mile/h) -
Accelerator pedal position 12.5% -
Engine speed 450 rpm -
Line pressure control solenoid valve No DTC (P0962, P0963)
Stepper motor No DTC (P1816)
Transmission range sensor No DTC (P0707, P0705)
Secondary pressure control solenoid valve No DTC (P0966, P0967)
Primary pulley speed sensor No DTC (P0717, P0716)
Secondary pulley speed sensor No DTC (P0722, P0721)
Primary pressure sensor No DTC (P0842, P0843)
Secondary pressure sensor No DTC (P0847, P0848)
TCC solenoid valve No DTC (P2764, P2763)
Lock-up/select switching solenoid valve No DTC (P1810)
CAN communication No DTC (U0100, U0073)
Battery voltage 10.5 V -
P0777: 
Shift position Other than "N" range
Brake light switch OFF
Transmission fluid temperature -20 °C (-4 °F) -
Change rate of vehicle speed - +/- 14 km/h (9 mile/h)/10 ms
Change rate of accelerator pedal position - +/- 6.25%/10 ms
CAN communication No DTC (U0100, U0073)
Line pressure control solenoid valve No DTC (P0962)
Secondary pressure control solenoid valve No DTC (P0966)