LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P1825: Learning Value Initialization Data Mismatched >> DTC Troubleshooting

DTC Troubleshooting

WARNING: This page is about a different variant/trim than selected.
DTC TROUBLESHOOTING CHART

Step Action YES NO
1  Was "CVT System Check" performed?  Go to Step 2. Go to CVT SYSTEM CHECK .
2  DTC check 
  1. Check DTC.

Is there DTC other than P1825? 		 Go to Step 3. Repair or replace defective wire harness.
3  DTC recheck 
  1. Perform TCM INITIALIZATION AND LEARNING CONTROL .
  2. Clear DTC. See DTC CLEARANCE .
  3. Confirm that ignition mode of keyless push start system is in "OFF".
  4. Perform DTC confirmation procedure and check DTC.

Is DTC P1825 still detected? 		 Substitute a known-good ROM (valve body assembly) and recheck DTC. End.
scientia non olet · About LEMON Manuals