LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P1810: Lock up / Select Control Circuit >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Check that the following condition is satisfied when using this procedure.
    • Battery voltage > 10.5 V
  1. Push engine switch to change ignition mode "ON".
scientia non olet · About LEMON Manuals