LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnostic Information and Procedures >> DTC P0962: Pressure Control Solenoid "A" Control Circuit Low/DTC P0963: Pressure Control Solenoid "A" Control Circuit High >> DTC Confirmation Procedure >> P0962

DTC Confirmation Procedure: P0962

WARNING: This page is about a different variant/trim than selected.
NOTE: Confirm that the following conditions are met in this procedure.
  • Battery voltage > 10.5 V
  1. Push engine switch to change ignition mode to "ON", and leave ignition mode in "ON" for 10 sec.
scientia non olet · About LEMON Manuals