DTC Detecting Condition and Trouble Area

WARNING: This page is about a different variant/trim than selected.

DTC DETECTING CONDITION CHART

DTC detecting condition	Trouble area
DTC P0826: Manual Mode Control Switch Circuit This DTC is detected if any one of the following conditions is met. Manual mode switch ON signal continues to be input for longer than 5 sec. even after "P", "R" or "N" range signal input. ON signal of manual shift-down switch or manual shift-up switch is input for longer than 5 sec. even while manual mode switch is OFF. (1 D/C detection logic but MIL does not light up)	Manual mode shift switch (include manual mode switch, manual shift-up switch and manual shift-down switch) and/or its circuit TCM

DTC detecting condition

Trouble area

DTC P0826: Manual Mode Control Switch Circuit
This DTC is detected if any one of the following conditions is met.

Manual mode switch ON signal continues to be input for longer than 5 sec. even after "P", "R" or "N" range signal input.
ON signal of manual shift-down switch or manual shift-up switch is input for longer than 5 sec. even while manual mode switch is OFF.

(1 D/C detection logic but MIL does not light up)

Manual mode shift switch (include manual mode switch, manual shift-up switch and manual shift-down switch) and/or its circuit
TCM