DTC Detecting Condition and Trouble Area
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION CHART
| DTC detecting condition |
Trouble area |
DTC P0716: Input/Turbine Speed Sensor "A" Circuit Range/Performance
This DTC is detected if all the following conditions are met.
- Difference between engine speed and primary pulley speed is higher than 1000 rpm for 5 sec. when lock-up ON.
- Difference between measured value and estimated value of primary pulley speed is higher than 1000 rpm for 5 sec. when lock-up ON.
(2 D/C detection logic) |
- Primary pulley speed sensor and/or its circuit
- Secondary pulley speed sensor and/or its circuit
- TCM
|