Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TORQUE SPECIFICATION
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kgf-m | lbf-ft | ||
| Oil pressure switch | 13 | 1.3 | 9.5 | |
| Engine oil drain plug | 35 | 3.6 | 26.0 | |
| Oil filter | 14 | 1.4 | 10.5 | |
| Oil pan baffle plate bolt | 11 | 1.1 | 8.5 | |
| Oil strainer bolt | 11 | 1.1 | 8.5 | |
| Oil pan bolt* | 15 N.m → 25 N.m (1.5 kgf-m → 2.5 kgf-m, 11.0 lbf-ft → 18.5 lbf-ft) | |||
| Transaxle bolt | 80 | 8.2 | 59.0 | (CVT model) |
| Transaxle bolt | 85 | 8.7 | 63.0 | (M/T model) |
| Drive plate cover bolt | 11 | 1.1 | 8.5 | (CVT model) |
| Clutch housing lower plate bolt | 11 | 1.1 | 8.5 | (M/T model) |
| Oil level gauge guide bolt | 11 | 1.1 | 8.5 | |
| Oil pump bolt (M10) | 55 | 5.6 | 40.5 | |
| Oil pump bolt (M8) | 25 | 2.5 | 18.5 | |
| Oil pump sprocket cover bolt | 11 | 1.1 | 8.5 | |
| Retainer | 49 | 5.0 | 36.5 | |
| Oil pump cover bolt | 12 | 1.2 | 9.0 | |
| Oil pump sprocket bolt | 45 | 4.6 | 33.5 | |
| Balancer shaft cover bolt | 29 | 3.0 | 21.5 | |
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to: