LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> SX4 Base >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Notes

TPMS Reset Procedures: Notes

NOTE: If a spare tire has been mounted, or if a wheel or tire pressure sensor has been replaced, the tire pressure sensors must be registered. Tire pressure sensors may be registered in either of 2 ways. If a SUZUKI-SDT scan tool is available, see Using Suzuki Scan Tool . Otherwise, see Without Suzuki Scan Tool .

When tire pressure warning light illuminates, immediately check air pressure of all tires and adjust to the specified pressure. Drive vehicle at least 25 mph (40 km/h) for a few minutes. Ensure the TPMS warning light goes out.

scientia non olet · About LEMON Manuals