LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer (4WD) System) >> Diagnostic Information and Procedures >> SDT Function (4WD) >> DTC Check Mode >> Operation Procedure

Operation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect "SDT".
  2. With engine at idle, touch "DTC check".

    Display shows malfunction experienced since the last erasing operation.

    NOTE: The details for "TIME" are as follows:
    • "0": Error currently detected with transfer control unit.
    • Except for "0": Error detected in the past and memorized with transfer control unit.

      Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").

scientia non olet · About LEMON Manuals