LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer (4WD) System) >> Diagnostic Information and Procedures >> SDT Function (4WD) >> Self-Diagnostic Procedure (Without SDT) >> Diagnostic Procedure (M/T models)

Diagnostic Procedure (M/T models)

WARNING: This page is about a different variant/trim than selected.
  1. Warm up engine.
  2. Turn ignition switch "ON" and "OFF" at least twice, and then turn ignition switch "OFF".
  3. Move M/T shift lever to neutral position.
  4. Turn 4WD shift switch to "2WD" position.
  5. Turn ignition switch "ON". (Do not start engine.)
  6. 4WD warning lamp should turn ON.

    If 4WD warning lamp does not turn ON, refer to [4WD WARNING LAMP DOES NOT TURN ON ].

  7. Move M/T shift lever to any position other than neutral.
  8. Turn 4WD shift switch to "2WD", "4H" and "2WD" in order.
  9. Move M/T shift lever to neutral position.
  10. Turn 4WD shift switch to "4H", "2WD" and "4H" in order.
  11. Move M/T shift lever to any position other than neutral.
  12. Turn 4WD shift switch to "2WD" position.
  13. Move M/T shift lever to neutral position.
  14. Read the flickering of 4WD warning lamp.

    Refer to "JUDGEMENT SELF-DIAGNOSIS ".

scientia non olet · About LEMON Manuals