LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer (4WD) System) >> Diagnostic Information and Procedures >> SDT Function (4WD) >> Self-Diagnostic Procedure (Without SDT) >> Diagnostic Procedure (A/T models)

Diagnostic Procedure (A/T models)

WARNING: This page is about a different variant/trim than selected.
  1. Warm up engine.
  2. Turn ignition switch "ON" and "OFF" at least twice, and then turn ignition switch "OFF".
  3. Move A/T selector lever to "P" position.
  4. Turn 4WD shift switch to "2WD" position.
  5. Turn ignition switch "ON". (Do not start engine.)
  6. 4WD warning lamp should turn ON.

    If 4WD warning lamp does not turn ON, refer to [4WD WARNING LAMP DOES NOT TURN ON ].

  7. Move A/T selector lever to "R" position.
  8. Turn 4WD shift switch to "2WD", "4H" and "2WD" in order.
  9. Move A/T selector lever to "P" position.
  10. Turn 4WD shift switch to "4H", "2WD" and "4H" in order.
  11. Move A/T selector lever to "N" position.
  12. Turn 4WD shift switch to "2WD" position.
  13. Move A/T selector lever to "P" position.
  14. Read the flickering of 4WD warning lamp.

    Refer to "JUDGEMENT SELF-DIAGNOSIS ".

scientia non olet · About LEMON Manuals