LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer (4WD) System) >> Diagnostic Information and Procedures >> SDT Function (4WD) >> Self-Diagnostic Procedure (Without SDT) >> Description

Self-Diagnostic Procedure (Without SDT): Description

WARNING: This page is about a different variant/trim than selected.

If the engine starts when there is something wrong with the 4WD system, the 4WD warning lamp turns ON or flickers in the combination meter. When the system functions properly, the warning lamp turns ON when the ignition switch is turned to "ON", and it turns OFF after engine starts. To locate the cause of a problem, start the self-diagnosis function. The 4WD warning lamp in the combination meter will indicate the problem area by flickering according to the DTC check. Refer to [DTC INDEX: TRANSFER CONTROL UNIT ].