Detailed Flow
WARNING: This page is about a different variant/trim than selected.
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | CUSTOMER INFORMATION Interview the customer to obtain detailed information about the symptom. |
GO TO 2 | |
| 2 | INITIAL INSPECTION Perform an initial inspection of all accessible transfer case harnesses and connectors under the vehicle. |
GO TO 3 | |
| 3 | DTC CHECK Perform "DTC check". Refer to [SDT FUNCTION (4WD) ]. |
GO TO 4 | |
| 4 | SYMPTOM Check for symptoms. Refer to [4WD SYSTEM SYMPTOMS: SYMPTOM TABLE ]. |
GO TO 5 | |
| 5 | MALFUNCTIONING PARTS Repair or replace the applicable parts. |
GO TO 6 | |
| 6 | SYSTEM OPERATION Check system operation. |
GO TO 7 | |
| 7 | DTC CHECK Perform "DTC check". Are any DTC's displayed? |
GO TO 5 | Inspection End |