LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2012 >> Equator Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer (4WD) System) >> Diagnostic Information and Procedures >> DTC U1010: Control Unit (CAN) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSIS PROCEDURE

Step Action YES NO
1  DTC REPRODUCTION PROCEDURE 
With SDT 
  1. Turn ignition switch ON.
  2. Perform transfer control unit DTC check. Refer to [SDT FUNCTION (ENGINE / POWERTRAIN) ].

Is DTC U1010 detected? 		 Perform diagnosis procedure. Refer to Diagnosis Procedure . Inspection End.
scientia non olet · About LEMON Manuals