Fuel Rails & Injectors (PFI): Installation
- Coat new "O" rings with thin coat of fuel. Install new grommets and "O" rings on injectors. See Fig 1
. Install injectors on fuel rail. Ensure injectors rotate smoothly on fuel rail. If not, check for binding "O" ring.
- Install insulators in cylinder head. Install fuel rail with injectors. Install and torque fuel rail mounting bolts to 14-20 ft. lbs. (19-27 N.m). To complete installation, reverse removal procedure.
- Check for fuel leaks. With fuel pump relay connected, install a jumper wire between fuel pump relay Pink and White/Blue wires. Fuel pump relay is located in main fuse box, near battery. See Figure
. Turn ignition on (engine off) to activate fuel pump.
Courtesy of SUZUKI OF AMERICA CORP.