LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Impreza Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Cockpit Display >> Installation

Cockpit Display: Installation

  1. Install the cockpit control module. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>ASSEMBLY .
  2. Install the data communication module. (Model with telematics) Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>INSTALLATION>DATA COMMUNICATION MODULE .
  3. Install the center information display assembly.
    CAUTION: Do not allow the harnesses and cords to interfere with or get caught by other parts.
    1. Connect each connector.
    2. Install the center information display assembly.

      Tightening torque: 

      7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  4. Install the panel assembly center. Ref. to EXTERIOR/INTERIOR TRIM>CENTOR CLUSTER>INSTALLATION .
  5. Install the driver monitoring unit. (Model with driver monitoring system) Ref. to INSTRUMENTATION/DRIVER INFO>DRIVER MONITORING UNIT>INSTALLATION .
  6. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  7. When the cockpit control module has been replaced, read the [Cockpit Control] customizing information. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>CUSTOMIZE .
scientia non olet · About LEMON Manuals