USB Power Supply
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- FRONT
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.NOTE:
- Shift the select lever into "N" before disconnecting the ground terminal from the battery sensor.
- On power seat models, move the front seat all the way forward before disconnecting the ground terminal from the battery sensor.
- Remove the cover assembly front and the console box assembly. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>REMOVAL .
- Remove the cover instrument panel CTR.
- Release the claws, and remove the cover instrument panel CTR.
- Remove the cover center side.
- Remove the screws.
- Disconnect the connector.
- Release the claws and clips and pull the cover center side RH to remove.
- Release the claws and clips and pull the cover center side LH to remove.
- Remove the switch panel front.
- Release the claws.
- Disconnect the connector and remove the switch panel front.
- Remove the AUX unit assembly.
- While pressing the claw, press it in from the rear to remove the AUX unit assembly.
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- CENTER
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the cover rear console assembly and the AUX unit assembly. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>DISASSEMBLY .
- REAR
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the floor mat side, floor mat center, and box sub-trunk assembly.
- Remove the third-row seats. Ref. to SEATS>Third Seat>REMOVAL .
- Remove the trim panel assembly apron RH. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL .
- Remove the AUX unit assembly.
- Disconnect the connector.
- While pressing the claw, press it in from the rear to remove the AUX unit assembly.