LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Cooling System (2.5L)) >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator. Refer to COOLING(STI)>RADIATOR>REMOVAL .
  2. Remove the V-belts. Refer to MECHANICAL(STI)>V-BELT>REMOVAL .
  3. Remove the crank pulley. Refer to MECHANICAL(STI)>CRANK PULLEY>REMOVAL .
  4. Remove the timing belt cover. Refer to MECHANICAL(STI)>TIMING BELT COVER>REMOVAL .
  5. Remove the timing belt. Refer to MECHANICAL(STI)>TIMING BELT>REMOVAL .
  6. Remove the automatic belt tension adjuster (A).
  7. Remove the belt idler (B).
  8. Remove the belt idler No. 2 (C).
    G07910956Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the cam sprocket LH. Refer to MECHANICAL(STI)>CAM SPROCKET>REMOVAL .
  10. Remove the belt cover No. 2 LH.
    G08539489Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the tensioner bracket.
    G07909879Courtesy of SUBARU OF AMERICA, INC.
  12. Disconnect the hose from water pump.
  13. Remove the water pump.
G04997829Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals