LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical System (2.5L)) >> Timing Belt Cover >> Removal

Timing Belt Cover: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. When working on the vehicle
    NOTE: When working on the vehicle, perform the following steps also.
    1. Remove the front under cover. Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  2. Remove the secondary air pump. Refer to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (STI)>SECONDARY AIR PUMP>REMOVAL .
  3. Remove the crank pulley. Refer to MECHANICAL(STI)>CRANK PULLEY>REMOVAL .
  4. Remove the clip holding the engine harness on the engine harness stay.
    G10264720Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the timing belt cover RH (B) together with the engine harness cover (A).
  6. Remove the timing belt cover LH (D) together with the engine harness stay (C).
  7. Remove front timing belt cover (E).
    G10265329Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals