Front Brake Pipe
CAUTION:
- Before handling the airbag system components, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
- When installing the brake pipe, do not bend.
- After installing the brake pipe and brake hose, perform air bleed.
- After installing the brake hoses, make sure that they do not contact the tires or suspension assembly, etc.
- Install the pipe assembly front ABS.
- Install the pipe assembly front ABS to the pipe clamp and clip.
- Install the pipe assembly front ABS using a flare nut wrench.
Tightening torque:
Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to BRAKE>GENERAL DESCRIPTION>COMPONENT>FRONT BRAKE PIPES AND HOSES .
- Install the vacuum booster assembly. Ref. to BRAKE>BRAKE BOOSTER>INSTALLATION .
- Install the support crossmember rear RH. Ref. to FRONT SUSPENSION>CROSSMEMBER SUPPORT>INSTALLATION .
- Install the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .