Sunroof Motor: Installation
CAUTION:
- For installation of the cover assembly stereo camera, refer to "INSTALLATION", "Stereo Camera Cover" in the "EyeSight" service information and observe the precautions for installation. Ref. to EYESIGHT>STEREO CAMERA>INSTALLATION .
- When installing the motor assembly, be careful not to move the cable assembly.
- Install the motor assembly.
Tightening torque:
4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
- Install the overhead console. (Models without EyeSight) Ref. to INSTRUMENTATION/DRIVER INFO>WARNING BOX>INSTALLATION .
- Install the cover assembly stereo camera. (Models with EyeSight) Ref. to EYESIGHT>STEREO CAMERA>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
- Perform the initialize operation. Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>Sunroof Control System>OPERATION>INITIALIZE OPERATION .
- Check the operation of sunroof by following the table below.
| Operation | Switch position |
|---|---|
| (1) Lid assembly closes completely. | Close |
| (2) Lid assembly opens 580 mm (22.83 in) away from completely closed position. | Open |
| (3) Lid assembly opens completely. | Open |
| (4) Lid assembly closes completely. | Close |