LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Rear Lock Button >> Installation

Rear Lock Button: Installation

CAUTION: Make sure that the harness grommet is securely installed. If not properly installed, this may cause leaks.
  1. Install the switch - request (lock).
  2. Install the switch - opener rear gate. Ref. to SECURITY AND LOCKS>REAR GATE OPENER BUTTON>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals