LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Rear Gate Opener Button >> Installation

Rear Gate Opener Button: Installation

CAUTION: Make sure that the harness grommet of the garnish assembly - rear gate is securely installed. If not properly installed, this may cause leaks.
  1. Install the switch - opener rear gate.
  2. Install the garnish assembly - rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>INSTALLATION .
  3. Install the trim panel - rear gate.
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, connect the battery negative terminal.
scientia non olet · About LEMON Manuals