Vehicle Control History Freeze Frame Data (Plug-In Control)
WARNING: This page is about a different variant/trim than selected.
- On [Start] screen, select [Diagnosis].
- On [Vehicle selection] screen, enter vehicle information and select [OK].
- On [Main Menu] screen, select [Each System].
- On [Select System] screen, select [Plug-in Battery Charger].
- On [Select Function] screen, select [Work Support].
- On [Work Support] screen, select [Vehicle Ctl. Hist.].
- Select the item name of vehicle control history to display the freeze frame data for control.
- Check the output data.
| Item name | Item explanation |
|---|---|
| Smoothed Value of BATT Voltage | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Total Distance Traveled | ↑ |
| Total Distance Traveled | ↑ |
| IGB Signal Status | ↑ |
| IGCT Signal Status | ↑ |
| HV Battery Total Voltage | ↑ |
| Charging Voltage for Hybrid Battery | ↑ |
| Number of Auxiliary Battery Voltage Low during Charging | ↑ |
| Charging Lid Switch Status | ↑ |
| Charging Lid Lock Pin Request Status | ↑ |
| Charging Lid Lamp Status | ↑ |
| Charging Indicator lighting Request | ↑ |
| AC Charging Inlet Connect Status | Connection state or availability of components connected to AC charger inlet |
| None/Connecting Charging Connector/Temporarily Nonusable/Nonusable/Not Connect/Connector Not Engaged Properly Status | |
| AC Charging Inlet Type | Charger inlet type |
| None/Type1/Type2 | |
| Charging Connector Connect Status | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Charging Connector Connect Status Voltage | ↑ |
| Charging Connector Insert Status | Connection state of charging connector or charger inlet |
| ON: Connected | |
| OFF: Not connected | |
| Charging Connector Lock Switch Status | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Charging Connector Lock Pin Status | ↑ |
| Charging Connector Lock Motor Unlock Direction Revolution Request Current | ↑ |
| Charging Connector Lock Motor Lock Direction Revolution Request Current | ↑ |
| Charging Cable Power Plug Connecting Status | Connection state of electric vehicle charger cable assembly to electrical outlet |
| None/Connecting/Not Connect/Abnormal | |
| Charger Power Supply Voltage Type | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Charger Operation Status | ↑ |
| Charger Operation Request | ↑ |
| Plug-in Control ECM Start Request after Charger Connected | Electric vehicle charger assembly activation request after charging cable connected |
| ON: Requested | |
| OFF: Not requested | |
| Charger Input Power | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Charger Output Power | ↑ |
| Charger Cooling Fan Drive Request | ↑ |
| Charger Cooling Fan Driving Duty | ↑ |
| Charger Cooling Fan Revolution | ↑ |
| Status Charging Control for HV | HV battery control state during charging |
| Unfixed/Preparing/Executing/End Processing | |
| Charging Control Signal Status | CPLT signal condition |
| None/Normal/Temporarily Nonusable/Nonusable/Stuck Low/Stuck High | |
| Current Time (hour) | Electric vehicle charger assembly current time (hour) |
| Current Time (sec) | Electric vehicle charger assembly current time (sec) |
| Current Time (min) | Electric vehicle charger assembly current time (min) |
| Current Time (day of the week) | Electric vehicle charger assembly current time (day of the week) |
| None/Monday/Tuesday/Wednesday/Thursday/Friday/Saturday/Sunday | |
| Gap of Current Time | Difference between time recognized by ECM and current time displayed on MFD |
| Not Gap or Gap | |
| Charging Permission from Hybrid Control ECM | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Charging Permission Continuation Status from Hybrid Control ECM | ↑ |
| Charging Permission Continuation Status Reset Request from Hybrid Control ECM | ↑ |
| Total Number of AC Charging | ↑ |
| AC Charging Total Time | ↑ |
| Number of Charge Canceled (Power Failure) | Number of times power supply to vehicle (from charging station, etc.) stopped during charging |
| Target Charging Power | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Target Charging Power from Charger | ↑ |
| Charging Required Time Calculation Status from Hybrid Control ECM | ↑ |
| Charging Required Time from Hybrid Control ECM | ↑ |
| Charging Elapsed Time | ↑ |
| AC Input Voltage for Monitoring | ↑ |
| AC Input Voltage for Control | ↑ |
| AC Input Voltage Instantaneous Value 1 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 2 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 3 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 4 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 5 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 6 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 7 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 8 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 9 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 10 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 11 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 12 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 13 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 14 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 15 for Waveform Monitoring | ↑ |
| AC Input Voltage Instantaneous Value 16 for Waveform Monitoring | ↑ |
| Time Cycle of Charging Voltage Zero Crossing Point | ↑ |
| Plug-in Control ECM Voltage (+B) | ↑ |
| Plug-in Control ECM Voltage (SMP5) | ↑ |
| Plug-in Control ECM Voltage (VOMS5) | ↑ |
| Plug-in Control ECM Voltage (VOM5) | ↑ |
| Plug-in Control ECM Voltage (VOMC5) | ↑ |
| Plug-in Control ECM System Voltage (+12.5 V) | ↑ |
| Plug-in Control ECM System Voltage (+1.15 V) | ↑ |
| Plug-in Control ECM System Voltage (-7.5 V) | ↑ |
| AC Input Current | ↑ |
| Charging Current Upper Limit | ↑ |
| Charging Current Duty from Charger | ↑ |
| Time Cycle of Charging Current Duty from Charger | ↑ |
| Charging Current Limit Status from Charger | ↑ |
| Charging Power Output Limit from Charger | ↑ |
| Charging Power Limit (Charging Voltage Low) | ↑ |
| Timer Charging Switch Status | ↑ |
| Timer Charging Reserve Cancel Request | ↑ |
| Timer Reset Request from Charger | Timer cancellation request output by charging station to Electric vehicle charger assembly (due to user operation, malfunction, etc.) |
| ON: Requested | |
| OFF: Not requested | |
| Charging History Information (Combination Meter) | Result of charging or power supply (combination meter) |
| None | |
| During AC Charging | |
| AC Charging Complete | |
| AC Charge Canceled by Abnormal AC Charging Circuit | |
| AC Charge Canceled by Hybrid Battery | |
| AC Charge Canceled by Battery (12V) | |
| AC Charge Canceled by User Operation | |
| AC Charge Canceled by Charger Power Failure | |
| AC Charge Canceled by Charger Power Supply Voltage Low | |
| AC Charge Canceled by Abnormal Charger Power Supply Voltage | |
| AC Charge Canceled by Hybrid Battery Thermal Keep Control Mode | |
| Charging History Information (Latest) | Result of charging or power supply (most recent) |
| None | |
| During AC Charging | |
| AC Charging Complete | |
| AC Charge Cancelled by Hybrid Battery Temperature out of Control Range | |
| AC Charge Canceled by Remote Engine Starter Request | |
| AC Charge Canceled by Charging Connector Unconnected | |
| AC Charge Canceled by Charger Power Failure | |
| AC Charge Canceled by Battery (12V) | |
| AC Charge Canceled by Timer Charging Reserve | |
| AC Charge Canceled by Charger Power Supply Voltage Out of Permissible Range | |
| AC Charge Canceled by Abnormal Charging Control Signal | |
| AC Charge Canceled by Charger External Failure of Charger | |
| AC Charge Canceled by Abnormal Charger | |
| AC Charge Canceled by Abnormal Hybrid Control | |
| AC Charge Canceled by Detected DTC | |
| Charging History Information (before One Time) | Result of charging or power supply (2nd most recent) |
| None | |
| During AC Charging | |
| AC Charging Complete | |
| AC Charge Cancelled by Hybrid Battery Temperature out of Control Range | |
| AC Charge Canceled by Remote Engine Starter Request | |
| AC Charge Canceled by Charging Connector Unconnected | |
| AC Charge Canceled by Charger Power Failure | |
| AC Charge Canceled by Battery (12V) | |
| AC Charge Canceled by Timer Charging Reserve | |
| AC Charge Canceled by Charger Power Supply Voltage Out of Permissible Range | |
| AC Charge Canceled by Abnormal Charging Control Signal | |
| AC Charge Canceled by Charger External Failure of Charger | |
| AC Charge Canceled by Abnormal Charger | |
| AC Charge Canceled by Abnormal Hybrid Control | |
| AC Charge Canceled by Detected DTC | |
| Charging History Information (before Two Time) | Result of charging or power supply (3rd most recent) |
| None | |
| During AC Charging | |
| AC Charging Complete | |
| AC Charge Cancelled by Hybrid Battery Temperature out of Control Range | |
| AC Charge Canceled by Remote Engine Starter Request | |
| AC Charge Canceled by Charging Connector Unconnected | |
| AC Charge Canceled by Charger Power Failure | |
| AC Charge Canceled by Battery (12V) | |
| AC Charge Canceled by Timer Charging Reserve | |
| AC Charge Canceled by Charger Power Supply Voltage Out of Permissible Range | |
| AC Charge Canceled by Abnormal Charging Control Signal | |
| AC Charge Canceled by Charger External Failure of Charger | |
| AC Charge Canceled by Abnormal Charger | |
| AC Charge Canceled by Abnormal Hybrid Control | |
| AC Charge Canceled by Detected DTC | |
| Charging History Information (before Three Time) | Result of charging or power supply (4th most recent) |
| None | |
| During AC Charging | |
| AC Charging Complete | |
| AC Charge Cancelled by Hybrid Battery Temperature out of Control Range | |
| AC Charge Canceled by Remote Engine Starter Request | |
| AC Charge Canceled by Charging Connector Unconnected | |
| AC Charge Canceled by Charger Power Failure | |
| AC Charge Canceled by Battery (12V) | |
| AC Charge Canceled by Timer Charging Reserve | |
| AC Charge Canceled by Charger Power Supply Voltage Out of Permissible Range | |
| AC Charge Canceled by Abnormal Charging Control Signal | |
| AC Charge Canceled by Charger External Failure of Charger | |
| AC Charge Canceled by Abnormal Charger | |
| AC Charge Canceled by Abnormal Hybrid Control | |
| AC Charge Canceled by Detected DTC | |
| Charging History Information (before Four Time) | Result of charging or power supply (5th most recent) |
| None | |
| During AC Charging | |
| AC Charging Complete | |
| AC Charge Cancelled by Hybrid Battery Temperature out of Control Range | |
| AC Charge Canceled by Remote Engine Starter Request | |
| AC Charge Canceled by Charging Connector Unconnected | |
| AC Charge Canceled by Charger Power Failure | |
| AC Charge Canceled by Battery (12V) | |
| AC Charge Canceled by Timer Charging Reserve | |
| AC Charge Canceled by Charger Power Supply Voltage Out of Permissible Range | |
| AC Charge Canceled by Abnormal Charging Control Signal | |
| AC Charge Canceled by Charger External Failure of Charger | |
| AC Charge Canceled by Abnormal Charger | |
| AC Charge Canceled by Abnormal Hybrid Control | |
| AC Charge Canceled by Detected DTC | |
| PFC Boosting Circuit Driver Drive Status | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Target PFC Boosting Circuit Boosted Voltage | ↑ |
| Voltage after Boosting by PFC Boosting Circuit | ↑ |
| Current after Boosting by PFC Boosting Circuit | ↑ |
| PFC Boosting Circuit Current Amplitude | ↑ |
| PFC Boosting Circuit Temperature | ↑ |
| PFC Boosting Circuit Output Limit Status (Over Temperature) | ↑ |
| Sub DC/DC Converter Driver Drive Status (for Charging) | ↑ |
| DC/DC Converter Control Mode (for Charging) | ↑ |
| Target Sub DC/DC Converter Current (for Charging) | ↑ |
| DC/DC Converter Temperature (for Charging) | ↑ |
| DC/DC Converter Output Limit Status (for Charging) (Over Temperature) | ↑ |
| Sub DC/DC Converter Operation Status (for Charging) | ↑ |
| Sub DC/DC Converter Drive Request (for Charging) | ↑ |
| Sub DC/DC Converter Operation Permission from Hybrid Control ECM (for Charging) | ↑ |
| Sub DC/DC Converter Operation Permission to Sub DC/DC Converter (for Charging) | ↑ |
| Target Sub DC/DC Converter Voltage from Hybrid Control ECM (for Charging) | ↑ |
| Target Sub DC/DC Converter Voltage (for Charging) | ↑ |
| Target Sub DC/DC Converter Voltage to Sub DC/DC Converter (for Charging) | ↑ |
| Sub DC/DC Converter Output Voltage (for Charging) | ↑ |
| Sub DC/DC Converter Output Current (for Charging) | ↑ |
| Sub DC/DC Converter Constant Current Control (for Charging) | ↑ |
| Sub DC/DC Converter Temperature (for Charging) | ↑ |
| Sub DC/DC Converter Stop Request (for Charging) (Over Temperature) | ↑ |
| Plug-in Control ECM Power Supply Relay Confirmed Status | Confirmation of state of IGCT SCENE relay when power supply from Electric vehicle charger assembly begins operating |
| (The IGCT input signal on/off state is monitored at a certain frequency and is confirmed if the same state is detected continuously.) | |
| Unfixed or Fixed | |
| Plug-in Control ECM Power Supply Relay Voltage | Voltage at IGCT SCENE relay when power supply from Electric vehicle charger assembly begins operating |
| Charging Relay Connect Request in CCID Box from CCID Box | Refer to the Data Monitor. Ref. to PLUG-IN BATTERY CHARGER (DIAGNOSTICS)>DATA MONITOR>LIST . |
| Charging Relay Connect Request in CCID Box from Plug-in Control ECM | ↑ |
| Rush Current Prevention Resistance Relay Activate Request | ↑ |