LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr580) (Service Information) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the transmission body. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>Transmission Assembly>REMOVAL .
  3. Disconnect the connector, and remove the primary speed sensor.
    G13603205Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals