LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (CVT Transaxle (Tr690)) >> Front Reduction Drive Gear >> Installation

Front Reduction Drive Gear: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Clean the mating surface of converter case cover and converter case.
  2. Select the shim for front reduction drive gear. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Front Reduction Drive Gear>ADJUSTMENT .
  3. Apply CVTF to the shims and install on the bearing catch surface of the front reduction drive gear.
  4. Install the seal ring to converter case cover.
    NOTE:
    • Use new seal rings.
    • When installing the seal rings, do not expand the seal rings too much.
    G09482326Courtesy of SUBARU OF AMERICA, INC.
  5. Install the front reduction drive gear and front reduction driven gear together.
    CAUTION: Be careful not to detach the spline of input clutch and the spline of front reduction driven shaft.
    G09482339Courtesy of SUBARU OF AMERICA, INC.
  6. Install the converter case cover. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Converter Case Cover>INSTALLATION .
  7. Install the oil pump chain cover and the oil pump chain. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Oil Pump Chain>INSTALLATION .
  8. Install the drive pinion shaft assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Drive Pinion Shaft Assembly>INSTALLATION .
  9. Install the primary pulley, secondary pulley and variator chain. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Primary Pulley and Secondary Pulley>INSTALLATION .
  10. Install the transmission case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transmission Case>INSTALLATION .
  11. Install the forward clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Forward Clutch Assembly>INSTALLATION .
  12. Install the intermediate case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Intermediate Case>INSTALLATION .
  13. Install the transfer reduction driven gear assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transfer Reduction Driven Gear>INSTALLATION .
  14. Install the transfer clutch assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transfer Clutch>INSTALLATION .
  15. Install the rear drive shaft. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Rear Drive Shaft>INSTALLATION .
  16. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Extension Case>INSTALLATION .
  17. Install the primary speed sensor. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Primary Speed Sensor>INSTALLATION .
  18. Install the transmission harness. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Transmission Harness>INSTALLATION .
  19. Install the control valve body and oil pan. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Control Valve Body>INSTALLATION .
  20. Install the air breather hose. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Air Breather Hose>INSTALLATION .
  21. Install the transmission assembly to the vehicle. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR690)>Automatic Transmission Assembly>INSTALLATION .
scientia non olet · About LEMON Manuals