Radar Sensor: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the radar bracket.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the radar sensor, and connect the connector.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Check the installation condition of the radar sensor. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT>RADAR SENSOR>INSPECTION
- Install the bumper face rear. Ref. to EXTERIOR/INTERIOR TRIM>REAR BUMPER>INSTALLATION
- Install the light assembly combination. Ref. to LIGHTING SYSTEM>REAR COMBINATION LIGHT ASSEMBLY>INSTALLATION
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
- Perform the adjustment of the radar sensor radar axis. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT>RADAR SENSOR>ADJUSTMENT>RADAR AXIS ADJUSTMENT