LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Horn >> Inspection

Horn System: Horn: Inspection

  1. Remove the horn assembly (Hi side & Lo side). Ref. to REMOVAL , Horn.
  2. Check the horn sounds when applying the battery voltage to the horn assembly.
    • Horn assembly - Lo side
    Fig 1: Applying Battery Voltage To Horn Assembly - Lo Side
    G06653677Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1 (+) - Horn case (-) Connect battery to the terminals Sounds
    • Horn assembly - Hi side
    Fig 2: Applying Battery Voltage To Horn Assembly - Hi Side
    G10272693Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1(+)- Horn case (-) Connect battery to the terminals sounds
  3. If it does not operate normally, replace the horn assembly.
scientia non olet · About LEMON Manuals