Rear Brake Pad: Inspection

WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Check the thickness of the pad - disc brake rear.

NOTE:

Always replace the pads of both wheels and both sides as a set.
Replace pad clips if they are twisted or worn.
Replace the pad if there is oil or grease on it.
Wear indicators are installed on the pad - disc brake rear inner, and a squeaking sound is heard if the pad is worn to the limit.

Fig 1: Identifying Pad Thickness

Courtesy of SUBARU OF AMERICA, INC.

Standard (A)		Wear limit (B)
Pad thickness	9.0 mm (0.354 in)	1.5 mm (0.059 in)

If the wear limit is exceeded in the inspection, replace the brake pad. <Ref. to REPLACEMENT , Rear Brake Pad.>