LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Horn >> Inspection >> Check Horn Assembly

Check Horn Assembly

  1. Remove the horn assembly (Hi pitch side and Lo pitch side). Refer to REMOVAL .
  2. Check the horn sounds when applying the battery voltage to the horn assembly.
    Fig 1: Checking Horn Sounds
    G06653677Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1 (+) - Horn case (-) Connect battery to the terminals Sounds
  3. If it does not operate normally, replace the horn assembly.
scientia non olet · About LEMON Manuals