LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Horn >> Removal

Horn System: Horn: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the Lo pitch side horn.
    1. Remove the clips and remove the air intake duct.
      Fig 1: Locating Air Intake Duct Clips
      G08583851Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the clips and remove the grille bracket.
      Fig 2: Locating Grille Bracket Clips
      G08582286Courtesy of SUBARU OF AMERICA, INC.
    3. Disconnect the connector.
    4. Remove the horn bracket mounting bolt, and remove the Lo pitch side horn.
      Fig 3: Locating Horn Bracket Mounting Bolt
      G06653674Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the Hi pitch side horn.
    1. Remove the clips and turn over the front mud guard RH.
      Fig 4: Locating Front Mud Guard Clips (RH)
      G08584672Courtesy of SUBARU OF AMERICA, INC.
    2. Disconnect the connector.
    3. Remove the horn bracket mounting bolt, and remove the Hi pitch side horn.
      Fig 5: Locating Horn Bracket Mounting Bolt
      G08584673Courtesy of SUBARU OF AMERICA, INC.