| ABS Sequence Control Mode |
Operate the valve and pump motor continuously to perform the ABS sequence control. |
< Refer to
ABS SEQUENCE CONTROL
. > |
| VDC Check Mode |
Operate the valve and pump motor continuously to perform the VDC sequence control. |
< Refer to
VDC SEQUENCE CONTROL
. > |
| Set up mode for Neutral of Steering Angle Sensor & Lateral G Sensor 0 point |
Set the steering angle sensor neutral position and the lateral G sensor "0" point. |
< Refer to
SET UP MODE FOR NEUTRAL OF STEERING ANGLE SENSOR & LATERAL G SENSOR 0 POINT
, ADJUSTMENT, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |
| Longitudinal G sensor & lateral G sensor 0 point setting mode |
Set "0" point of the longitudinal G sensor and the lateral G sensor. |
< Refer to
LONGITUDINAL G SENSOR & LATERAL G SENSOR 0 POINT SETTING MODE
, ADJUSTMENT, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |