LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Center Differential Carrier >> Removal

Center Differential Carrier: Removal

  1. Remove the transmission assembly from the vehicle. Ref. to REMOVAL , Automatic Transmission Assembly.
  2. Remove the rear vehicle speed sensor, and separate the extension case from transmission case. Ref. to REMOVAL , Extension Case.
  3. Extract the rear drive shaft. Ref. to REMOVAL , Rear Drive Shaft.
  4. Pull out the center differential carrier assembly.
    Fig 1: Identifying Center Differential Carrier Assembly
    G05022319Courtesy of SUBARU OF AMERICA, INC.
  5. Pull out the shim (s) from transmission case.
scientia non olet · About LEMON Manuals