LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Rear Drive Shaft >> Removal

Rear Drive Shaft: Removal

  1. Remove the transmission assembly from the vehicle. Ref. to REMOVAL , Automatic Transmission Assembly.
  2. Remove the rear vehicle speed sensor, and then remove the extension case. Ref. to REMOVAL , Extension Case.
  3. Pull out the rear driveshaft from center differential assembly.
    Fig 1: Identifying Rear Drive Shaft Into Reduction Drive Gear And Center Differential Assembly
    G05022299Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the drive plate and driven plate.
scientia non olet · About LEMON Manuals