LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission And Differential 5MT) >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the differential side retainers using ST.

    ST 499787000 WRENCH ASSY

  2. Install the bearing outer race to the transmission case.
  3. Install the differential assembly.
    NOTE: Be careful not to fold the sealing lip of oil seal.
    Fig 1: Installing Differential Assembly
    G05003046
  4. Install the main shaft assembly.

    < Ref. to INSTALLATION , Main Shaft Assembly for Single-range. >

  5. Install the drive pinion assembly. < Ref. to INSTALLATION , Drive Pinion Shaft Assembly. >
  6. Install the transmission case. < Ref. to INSTALLATION , Transmission Case. >
  7. Install the transfer case together with the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  8. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals