LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Automatic Transmission 5AT) >> Oil Pump Cover >> Removal

Oil Pump Cover: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Pull out the torque converter assembly. < Ref. to REMOVAL , Torque Converter Assembly. >
  3. Remove the transmission harness connector from stay.
  4. Remove the oil charge pipe. < Ref. to REMOVAL , Oil Charge Pipe. >
  5. Remove the ATF filter inlet and outlet pipes. < Ref. to REMOVAL , ATF Filter. >
  6. Separate the converter case and transmission case. < Ref. to REMOVAL , Converter Case. >
  7. Remove the oil pump cover mounting bolt, and then separate the oil pump cover from the AT main case by lightly tapping with plastic hammer.
    Fig 1: Identifying Oil Pump Cover Mounting Bolt
    G05022338
scientia non olet · About LEMON Manuals