LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transmission 4AT) >> Parking Pawl >> Installation

Parking Pawl: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the parking pawl, return spring and shaft.
    Fig 1: Identifying Parking Pawl, Return Spring And Shaft
    G05021925Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reduction drive gear. < Ref. to INSTALLATION , Reduction Drive Gear. >
  3. Install the rear vehicle speed sensor and extension case. < Ref. to INSTALLATION , Extension Case. >
  4. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals